How Much Does It Cost To Pressure Wash A Fence In Virginia?
Got a fence that’s seen better days? Maybe it’s looking a little dull, streaked with dirt, or has some green stuff clinging to the boards.
Between rain, humidity, and pollen season, fences take a beating. And while a dirty fence might not seem like a big deal, it can really drag down the look of your whole yard.
Thinking about cleaning it up? Pressure washing is one of the easiest ways to make a tired fence look almost new again.
But before you start calling around for quotes, you’re probably curious about the cost.
In this post, we’ll breakdown how much does it cost to pressure wash a fence in Virginia, and the factors that affect your final cost. We’ll also give you a quick rundown of our prices.
Our Virginia Fence Pressure Washing Prices
Check Out Our: Fence Pressure Washing Service in Powhatan
Average Cost To Pressure Wash Fence
The average cost to pressure wash a fence usually lands somewhere between $90 and $350.
If you’re just doing a small section or a shorter fence, you might only pay around $100. But longer fences or ones that haven’t been cleaned in years will be on the higher end – sometimes even more if there are special circumstances.
Most pressure washing companies charge by the linear foot, with prices ranging from $0.20 to $0.60 per square foot, depending on a few different things (we’ll get into those soon).
Here’s a rough idea of what that might look like:
| Fence Length | Fence Size in Square Feet | AVG Price |
| 50 feet | 300 | $60 – $180 |
| 100 feet | 600 | $120 – $360 |
| 150 feet | 900 | $180 – $540 |
| 200 feet | 1200 | $240 – $720 |
Of course, these are just rough estimates.
Factors That Affect The Cost Of Pressure Washing A Fence
There are a handful of things that can swing the cost to pressure wash a fence up or down. Let’s go through the most common ones you’ll run into:
#1. Fence Size
This one’s probably the most obvious – the more fence you have, the more you’ll pay.
If you have a cute little backyard with just a few panels, great! But if your fence wraps around an acre? That’s gonna cost more.
Companies often charge by the linear foot, so they’ll measure how long your fence is, and multiply that by their rate. Simple math, but important to know.
Also Read: How Much Does It Cost To Pressure Wash A Deck In Virginia?
#2. Fence Material
The type of fence you have affects how it gets cleaned.
A wooden fence is going to need a bit more TLC than, say, vinyl. Wood can’t take the same pressure as other materials. It can splinter or gouge if it’s not handled carefully, so the job needs a softer touch and a more careful approach.
Vinyl or PVC fences are usually easier and faster to wash. They’re more durable and don’t soak up moisture like wood, which cuts down on drying time too.
Metal or chain-link fences are even quicker. But if there’s rust involved, that might add a little to the cost.
#3. Condition Of The Fence
Is your fence just dusty? Or are we talking mold, algae, and years of dirt buildup?
The worse the condition, the more time and cleaner it takes to get the job done.
Stains from leaves, rust, or sap can be super stubborn and often need special cleaning solutions.
If your fence has peeling paint or old stain, some contractors might charge more to strip it clean. Same goes for fences with thick layers of grime that need a good pre-soak or repeat passes.
#4. Fence Height And Accessibility
A standard 4-foot picket fence is one thing. But a fence that is 6 or 8 feet tall and stretches along a slope is a different story.
Tall fences may require ladders, safety gear, or extension wands to reach the top.
And if the fence is wedged in behind bushes, trees, or landscaping, that slows things down too.
The easier it is to get to, the cheaper it’ll be. So if your fence is easy to access and no taller than average, you’re probably in the lower price range.
Also Read: Can You Pressure Wash In The Rain?
#5. Prep Work
Some fences are ready to go. Others need a little prep before anyone turns on the pressure washer. Here’s what that might include:
- Clearing vines or overgrown plants
- Removing patio furniture or lawn decor nearby
- Sweeping or rinsing off loose debris
- Taping or protecting outlets, lighting, or delicate parts
Some pros include this in their base price, others charge separately.
If your fence needs a lot of prep, expect a small bump in the cost.
#6. Location
Virginia’s a big state, and pricing can vary depending on where you live.
In places like Northern Virginia or closer to DC, you’ll probably see higher prices, just because everything costs more there.
In smaller towns or rural areas, rates might be lower.
But if you’re far out from where the pressure washing company is based, they might charge a travel fee. It’s something to ask about when you call around.
#7. Add-On Services
Pressure washing might just be the first step. Many homeowners follow up with sealing or staining the fence to protect it from the weather and keep it looking sharp.
That’s a great move, especially for wood fences, but it comes at an extra cost.
You might also see offers for:
- Fence repairs (loose boards, nails, or posts)
- Mold or algae treatment
- Gutter or deck washing while they’re at it
These add-ons can usually be bundled for a better price than doing them separately.
Bottom Line
On average, the cost of pressure washing a fence is around $0.20 – $0.60 per square foot in Virginia, with some jobs going higher depending on what you’ve got going on.
A simple 100-foot fence in decent shape might cost about $180. A bigger fence with grime, mold, or tricky access could run up to $400 or more.
Want to save some money? You can rent a pressure washer for about $50 to $100 a day.
But keep in mind, using one takes a little practice, especially on wood. Done wrong, it’s easy to damage boards or leave streaks.
Hiring a pressure washing pro is often the safer bet. They’ll get it done fast, clean, and with better results. Most offer free estimates, so it’s worth getting a few quotes to compare.
